Bahnhofstrasse 21
CH-6300 Zug
Phone: +41 41 710 06 03
Fax: +41 41 710 81 38
Contact form
Site plan / address
NAVIGATION
CONTACT
Bahnhofstrasse 21
CH-6300 Zug
Phone: +41 41 710 06 03
Fax: +41 41 710 81 38
Contact form
Site plan / address
Worldwide Presence
Glossary
- ATS-DCP 2000
- ATS-DCP 2000
Digital operation control of the US-2000 banding machine
- ATS-DCP 2100
- ATS-DCP 2100
Digital operation control of the US-2100 banding machine
- Botenfile
- Botenfile
In a zip code/mailman presorting, an address is compared with an official post office table and where available assigned to the appropriate mailman. These shipments are gathered and banded in bundles.
- Burnt film
- Burnt film
Burnt in film residues on the heating element
- Designer sheet metal
- Designer sheet metal
Thanks to the stamped structure in the designer sheet metal, the band is pushed with less friction resistance into the arch. This choice of material makes the machine robust and rapid.
- Digital control unit
- Digital control unit
The digitial control unit allows more precise and storable settings of the various parameters. Particularly also suitable for "soft" products since the band can be pulled back to a fixed length without harming the product.
- Ergonomic operation
- Ergonomic operation
Easy, convenient and comfortable operation.
- Heat sealing
- Heat sealing
Welding by heating of the coated banding material.
- Jumbo rolls
- Jumbo rolls
Jumbo rolls with more meters for fewer roll changes.
- Printer position control
- Printer position control
With the printer position control the band imprint can be placed at the desired site.
- RAL colors
- RAL colors
RAL colors are standard colors according to a series of color collections for the industry which is published by the Deutsche Institut für Gütesicherung und Kennzeichnung.
- Soft tension
- Soft tension
Very weak band tension for delicate products.
- Sonotrode system
- Sonotrode system
The ultrasound vibrations are transferred to the material to be welded by the sonotrode.
- Support pin
- Support pin
Supportive construction for thin and soft products
- Thermal transfer printer
- Thermal transfer printer
Thermal transfer printers work with color band or color films. The color films are coated with a wax-like color. A push button heats the color film at the site on which a point should be printed. Thus, the color becomes liquid and is transferred to the paper or film band.
- Ultra-Sonic
- Ultra-Sonic
The ultrasound generator generates electrical vibrations with a frequence of 40,000 Hz per second. These vibrations are transferred to the material to be welded by a sonotrode.
The Ulta-Sonic technology with cold welding guarantees clean sealing and demonstrates numerous advantages:
-no heating time, the machine is immediately operational
-no odor and smoke build up
-no burnt film deposits
-no finger injuries due to heat
-no residues which can fall into the machine
-no replacing of heating elements
The sealing resistance can be set infinitely variable, lightly adhering so the seal can be opened by hand or up to the point of maximum sealing for heavy packages. This technology which works without damaging the edges of the product is appropriate for a variety of uses. Ultrasound is also successfully used for medical diagnoses.
