Banding system US-2000 TRS-SLM

For aligned stacks for single or triple use


Can be connected directly to saddle stitchers or adhesive binders

The US-2000 TRS-SLM can be directly connected to a saddlestitcher or adhesive binder with a stacker and transfers the product stack (1- to 3 benefit) at full speed capacity.


You receive a perfectly aligned product stack thanks to the alignment on all sides of the stack and the soft or hard stack compression before banding. By banding with adjustable tension your printed products are bundled without any damage to the edges.


The US-2000 TRS-SLM-A takes over the product stack (1-to 3 benefit) out of the stacker onto the shuttle worth conveyor. Side guide plates go into the stacker and the retracted flaps insure that the stack is removed from it. The servo-handling system pushes the stack into the banding machine. The inflow control is quick and easy due to the adjustable side guide plates.



More pictures

   Technical Data
  Performance up to 24 bandings per minute
  Band width 20, 30, 50 mm
  Voltage 230 V, 13 A
  Electrical power depending on model
  Weight depending on model
  Dimension depending on model
  Arch sizes (WxH) 360 x 260 mm (others upon request)



  • ABC-dispenser
  • 3 benefits with 3 guides
  • Warning sensor for banding material usage
  • printer position control for printed banding material
  • Single or double press




Recommend product

Leave this field blank
Contact and advice
T: +41 41 710 06 03

Request return call

Request quote

Supply and assembly

Advice from specialist personnel

Service and repair work

Repeat material orders
   Suitable material



Banding film


Banding paper

Imprinted banding material